EN

Back

Radon prevention with the ReMo click sys-tem

The ReMo click system by FRÄNKISCHE helps prevent humidity and harmful radon from entering buildings. The reason: The electrical installation system is mounted onto weld lines by means of an adhesive rail without using any tools, which means that the sealing layer under the screed floor does not get damaged. This prevents humidity and harmful radon from entering the building through the foundation slab.

You can neither see it nor smell or taste it: the inert gas radon. This radioactive gas develops as a result of the decay of natural uranium and is released from the soil and rocks. Once released from the soil, it enters the inside of the building through cracks and leaks in the foundation. Depending on the region, building ground and housing situation, high concentrations can quickly develop in the room air. If the residents breathe in this inert gas in increased concentration over a longer period of time, the risk of lung cancer rises dramatically. According to the Federal Office for Radiation Protection, radon is the second most common cause of lung cancer after smoking. In order to counter the invisible threat already during new construction or during renovation, the ReMo click system by FRÄNKISCHE is a recommended solution for electrical installations on sealed foundation slabs.

No risk of radioactive radon

The ReMo click adhesive rail, which holds electrical conduits, is mounted without using any tools and thus does not damage the sealing layer under the screed floor which would be the case with drilling or screwing. Thanks to the system installation by means of adhesion and clicking, there is no formation of cracks, joints or leaks in the foundation slab through which the dangerous gas and undesired humidity can enter the building.

Sand-free hot or cold weld lines that are used as sealing under screed floors as well as cavity walls are the most frequent application areas of the electrical installation system. "Electrical installations with our ReMo click system right on the weld line are a good solution to prevent radon from entering the building. This provides more safety for inhabitants," explains Sascha Buld, Product Manager FRÄNKISCHE Electrical Systems.

ReMo click system: reliable and flexible

Reliable, time-saving and without tools – the ReMo click installation system is easy to process: One specialist alone mounts the self-adhesive ReMo click rail that sticks to clean surfaces. Subsequently, the FFKu ReMo click plastic conduit profiled on both sides is clicked onto it thus creating a secure connection due to the patented clamp geometry. The high compressive strength of the conduit of 500 N/5 cm increases both crush-resistance and mechanical protection of cables and wires making the conduit ideal for installations on the floor. "ReMo click saves time and costs in electrical installation: Thanks to the adhesive rail and clamp connection, the conduit can be installed by one specialist alone, no drilling, milling, or slotting required." Sascha Buld summarises the benefits.

If you want to prevent humidity and the harmful inert gas radon from entering the building through the foundation slab, then the ReMo click system by FRÄNKISCHE is a sustainable solution for electrical installation on the weld line. Because the self-adhesive rail and the profiled plastic conduit keep the sealing layer under the screed floor intact – reliable radon prevention without the risk of leaks.