Your web browser is outdated.

In order to be able to use the full functionality of our website, please update your browser.

Rigofill® ST-B block/half block

Rigofill® ST-B block/half block
Rigofill® ST-B block/half block
Rigofill® ST-B block/half block
Rigofill® ST-B block/half block

Description

The heavy-duty Rigofill ST-B storage/infiltration unit has a base of 800 x 800 mm and a height of 660 mm. The block is made of polypropylene (PP).

The Rigofill ST-B full block consists of two half elements to be installed on site and has a void ratio of > 96 %. The Rigofill ST-B half block consists of only one half element, which must be assembled with a roof slab on site. The cross-shaped inspection tunnel in the storage/infiltration unit has been designed for the use of automotive dollies. This allows for full inspection of the effective drainage surface and the entire system volume with all statically relevant bearing-type fixtures. In combination with QuadroControl ST-B, Rigofill ST-B storage/infiltration systems have been designed for professional final acceptance inspection and repeated inspection. Installation at medium depths (up to 4 m) and under trafficked areas (HGV 60) is possible.

NB! Follow the Rigofill ST-B installation manual!

Rigofill ST-B block

  • W x D x H = 800 x 800 x 660 mm
  • Gross volume: 422 l
  • Storage volume: 406 l

Rigofill ST-B half block

  • W x D x H = 800 x 800 x 350 mm
  • Gross volume: 224 l
  • Storage volume: 212 l

Application

Construction of gravel-free swales for the infiltration, retention and storage of stormwater runoff, in combination with the RigoFlor special geotextile lining, QuadroControl ST-B inspection shafts and additional accessories.

Components

Downloads