Rigofill® ST block/half block
The heavy-duty RigofillST storage/infiltration unit has a base of 800 x 800 mm and a height of 660 mm. The block is made of polypropylene (PP).
The Rigofill ST full block consists of two half elements to be installed on site and has a void ratio of > 96 %. The Rigofill ST half block consists of only one half element, which must be assembled with a roof slab on site. The cross-shaped inspection tunnel in the storage/infiltration unit has been designed for the use of automotive dollies. This allows for full inspection of the effective drainage surface and the entire system volume with all statically relevant bearing-type fixtures. In combination with QuadroControl ST, Rigofill ST storage/infiltration systems have been designed for professional final acceptance inspection and repeated inspection. Installation under trafficked areas (HGV 60) and at great depths is possible.
NB! Follow the Rigofill ST installation manual! Rigofill ST block
- W x D x H = 800 x 800 x 660 mm
- Gross volume: 422 l
- Storage volume: 406 l
Rigofill ST half block
- W x D x H = 800 x 800 x 350 mm
- Gross volume: 224 l
- Storage volume: 212 l
Rigofill ST / ST-B – complies with EN 17152-1
EN 17152-1 is the first product standard for storage/infiltration modules on a European basis. It was published in
November 2019 together with the test standards for short-term compressive strength (EN 17150) and long-term
compressive strength (EN 17151).
Construction of gravel-free swales for the infiltration, retention and storage of stormwater runoff, in combination with the RigoFlor special geotextile lining, QuadroControl ST inspection shafts and additional accessories.
Data Sheet Rigofill ST