Your web browser is outdated.

In order to be able to use the full functionality of our website, please update your browser.

SediPipe® level

SediPipe® level
SediPipe® level


In case of SediPipe level systems, inlet and outlet are of equal height. This allows for minimum installation depths of the drainage pipe and/or the downstream swales. SediPipe level can be used universally for different purposes:

  • discharge into a surface waterbody or the sewer
  • installation upstream of or parallel to a SickuPipe pipe swale
  • installation upstream of or parallel to a Rigofill detention/infiltration unit (DIU) (non-integrated construction)

The inlet at the start shaft can be rotated by 360 degrees. Inlet and outlet diameters can be selected from DN 200 to DN 300. The flow direction of the target shaft is available in straight, left and right designs or may be factory-set to a customised angle between 90 degrees and 270 degrees. Therefore, the system can easily be adapted to on-site requirements. Project-related designs are available upon request.

Stormwater treatment systems with the following certificates tested by independent institutes: HTWK Leipzig, IKT Gelsenkirchen, IFS Hanover, TU Delft, etc.

  • Equivalent to stormwater sedimentation tanks
  • Classification in ATV-DVWK-M 153: System types D21, D24, D25
  • Determination of pass-through values according to ATV-DVWK-M 153
  • Preventing remobilisation
  • Functionality of the flow separator
  • Performance verification and dimensioning using a specifically developed verification procedure according to Section DWA-A 102-2/BWK-A 3-2, (residence time method")

Stormwater treatment system consisting of:

  • start shaft
  • sedimentation path (Main conduit with compliance certificate (Ü sign) in accordance with Building Rules List A of the German Institute for Building Technology (DIBt))
  • target shaft with outlet (bottom-aligned to inlet) at the extension pipe

SediPipe level 400/6

  • sedimentation path DN 400, length: 6 m

SediPipe level 500/6

  • sedimentation path DN 500, length: 6 m

SediPipe level 600/6

  • sedimentation path DN 600, length: 6 m

SediPipe level 500/12

  • sedimentation path DN 500, length: 2 x 6 m

SediPipe level 600/12

  • sedimentation path DN 600, length: 2 x 6 m


Treatment of polluted stormwater runoff with inlet and outlet at the same height and universal pipe connection for all downstream installations.