AquaLimit is a PP vortex shaft DN 500 suitable for many applications with tested and proven stainless steel throttle valve, manufacturer: UFT Umwelt- und Fluid-Technik Dr. H. Brombach GmbH. AquaLimit is manufactured and dimensioned according to project-specific needs. The ready-to-connect vortex shaft is incorporated in the drainage system and allows efficient and convenient handling as compared to conventional reinforced concrete shafts. The vortex valve that can be removed from the ground level allows easy cleaning and an emergency emptying of the tank, if necessary – without even requiring access! The subsequent adjustment of the vortex outlet at the valve, its replacement and removability are further arguments for this solution. If necessary, an emergency overflow may be incorporated to limit the maximum water level (QuadroOverflow).
Vortex shaft for the controlled discharge of stormwater from stormwater detention systems
Ready-to-connect plastic shaft DN 500, material PP, black outside, yellow inside. Vortex valve can be removed from the ground level upwards. This allows cleaning and maintenance of the valve without requiring access to the shaft. There is the option of an emergency emptying of the tank when the valve is removed. Optional subsequent adjustment of the vortex outlet by adjusting / exchanging the valve.
AquaLimit is manufactured according to project-specific needs.
Ready-to-connect vortex shaft with stainless steel throttle valve for the controlled discharge of stormwater from detention systems such as Rigofill inspect, MuriPipe or from ground basins. Ideal for systems which must meet very high requirements concerning operating reliability and with the need of high discharge efficiency throughout all operating stages.